Home > Findings > Custom Capture End Caps - Brass
SilverSilk Brass End Caps are designed with inner grooves to firmly hold and finish the ends of SilverSilk's Capture 3mm chain.
The plated brass finish gives your project an elegant look.
Sort By:
Page of 1
Triple Strand Silver Plated Brass End Caps Triple Strand Red Brass End Caps Triple Strand Gold Plated Brass End Caps
Our Price: $9.00
Our Price: $9.00
Our Price: $9.00

Triple strand end caps designed for the Capture 3mm round SilverSilk knit wire. This item has a silver plate over a brass cast. The SilverSilk logo is engraved on one side of each end cap. Item is sold per pair.

Triple strand end caps designed for the Capture 3mm round SilverSilk knit wire. This item looks like copper, but it is red brass. The SilverSilk logo is engraved on one side of each end cap. Item is sold per pair.

Triple strand end caps designed for the Capture 3mm round SilverSilk knit wire. This item is gold plated over a brass cast. The SilverSilk logo is engraved on one side of each end cap. Item is sold per pair.

Triple Strand Dark Rhodium Plated Brass End Caps Double Strand Silver Plated Brass End Caps Double Strand Red Brass End Caps
Our Price: $9.00
Our Price: $7.50
Our Price: $7.50

Triple strand end caps have three channels in each end cap to hold three strands of wire and are designed for the Capture & Pearlesque SilverSilk knit wire. This item has a dark rhodium plate over a brass cast. The SilverSilk logo is engraved on one side of each end cap. Item is sold per pair.

This is a custom designed, high quality brass end cap by metalsmith, William E. Leth to perfectly fix and tightly close SilverSilk's 3mm round Capture knitted bead chain. This item is a double strand and has been designed with grooves on it's interior to capture both the ball chain and knit of the wire when closed with pliers or gently tapped with a nylon or leather mallet. Sold per package of two (one pair).

This item is on back order until 12/5/2011 and may ship separately than the rest of your order. You will not be charged twice for shipping.
This is a custom designed end cap by metalsmith, William E. Leth to perfectly fix and tightly close SilverSilk's 3mm round Capture knitted bead chain. This item is red brass, double strand and has been designed with grooves on it's interior to capture both the ball chain and knit of the wire when closed with pliers or gently tapped with a nylon or leather mallet. Sold per package of two (one pair).

Double Strand Gold Plated Brass End Caps Double Strand Dark Rhodium Plated Brass End Caps Single Strand Silver Plated End Cap
Our Price: $7.50
Our Price: $7.50
Our Price: $6.00

This is a custom designed end cap to perfectly fix and tightly close SilverSilk's Capture & Pearlesque knitted bead chain. This item is gold plated over a brass cast, is a double strand and has been designed with grooves on it's interior to capture both the ball chain and knit of the wire when closed with pliers or gently tapped with a nylon or leather mallet. Sold per package of two (one pair).

This is a custom designed, high quality, end cap to perfectly fix and tightly close SilverSilk's Capture & Pearlesque knitted bead chain. This item is dark rhodium plated over a brass cast, is a double strand and has been designed with grooves on it's interior to capture both the ball chain and knit of the wire when closed with pliers or gently tapped with a nylon or leather mallet. Sold per package of two (one pair).

Silver plated brass single strand end cap custom designed and casted to fit SilverSilk's 3mm round Capture chain. Each single strand end cap is 4.3mm wide x 9mm in length with a 3mm diameter opening for the knitted wire. The inside mouth of the end caps has grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included)

Single Strand Red Brass End Cap Single Strand Gold Plated Brass End Cap Single Strand Dark Rhodium Plated Brass End Caps
Our Price: $6.00
Our Price: $6.00
Our Price: $6.00

These single strand end caps were custom designed and casted to fit SilverSilk's 3mm round Capture chain. The red brass has the look and feel of copper, yet the brass is a much stronger metal. The single strand end cap is 4.3mm wide x 9mm in length with a 3mm diameter opening for the knitted wire. The inside mouth of the end caps has grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included)

These single strand end caps were custom designed and casted in brass then given a gold plate and were created to perfectly fit SilverSilk's 3mm round Capture chain. The single strand end cap is 4.3mm wide x 9mm in length with a 3mm diameter opening for the knitted wire. The inside mouth of the end caps has grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included)

These single strand end caps were custom designed and casted to fit SilverSilk's Capture & Pearlesque chain and have a dark rhodium plate over brass. Each single strand end cap is 4.3mm wide x 9mm in length with a 3mm diameter opening for the knitted wire. The inside mouth of the end caps has grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included)

"Terminator" (No Ring) Red Brass 3mm End Cap "Terminator" (No Ring) Gold Plated Brass 3mm End Cap "Terminator" (No Ring) Dark Rhodium Plated Brass 3mm End Cap
Our Price: $5.00
Sale Price: $3.50
Savings: $1.50
Our Price: $5.00
Sale Price: $3.50
Savings: $1.50
Our Price: $5.00
Sale Price: $3.50
Savings: $1.50

The Red Brass "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip.  Each end cap is bare red brass (looks copper) &  has a 3mm diameter opening for the knitted wire and is 9mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).

The Gold Plated "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip. Each end cap is a gold plated brass & has a 3mm diameter opening for the knitted wire and is 9mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).


30% Off

The Dark Rhodium "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip. Each end cap is a dark rhodium plated brass & has a 3mm diameter opening for the knitted wire. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).

Short "Terminator" (No Ring) Silver Plated Brass 3mm End Cap Short "Terminator" (No Ring) Red Brass 3mm End Cap Short "Terminator" (No Ring) Gold Plated Brass 3mm End Cap
Our Price: $4.50
Sale Price: $3.15
Savings: $1.35
Our Price: $4.50
Sale Price: $3.15
Savings: $1.35
Our Price: $4.50
Sale Price: $3.15
Savings: $1.35

The Silver Plated "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip.  Each end cap is a silver plated brass & has a 3mm diameter opening for the knitted wire and is 5mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).

The Red Brass "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip.  Each end cap is bare red brass (looks copper) &  has a 3mm diameter opening for the knitted wire and is 5mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).

The Gold Plated "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip. Each end cap is a gold plated brass & has a 3mm diameter opening for the knitted wire and is 5mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).

Short "Terminator" (No Ring) Dark Rhodium Plated Brass 3mm End Cap
Our Price: $4.50
Sale Price: $3.15
Savings: $1.35

The Dark Rhodium short "Terminator" end cap is designed to finish the ends of the SilverSilk Capture or Pearlesque style knitted wires that do not require a clasp. It is an end cap without a ring attached to it's tip. Each end cap is a dark rhodium plated brass & has a 3mm diameter opening for the knitted wireand is 5mm long. The inside mouth of the end caps have grooves to properly hold the Capture chain securely. This item is sold per pair (2 end caps included).